onlineCarReport

Chevy Traverse timing chain replacement cost and what it does to the SUV's value

Published estimates for a Traverse chain job begin at $2,541 and top out at $4,100, while owners filing with NHTSA report paying $2,870 to $4,500. On an older Traverse the repair is a large share of the sale price, so the cost and the value have to be read together.

Updated November 5, 2026 · Sources cited below

Have a VIN? Check that car

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.

View sample report
Hands signing a repair order beside a panel listing three timing chain points

THE SHORT ANSWER

For a 2019 Traverse, RepairPal's figure for the chain plus gears runs $2,701 up to $3,541, and owner-reported bills on 2010 and 2011 models reach higher. GM's own labor allowance for the first-generation job is 9.5 hours front-drive and 9.7 all-wheel. No recall or special coverage pays for this job today, so the cost lands on whoever owns the car.

RepairPal, 2019 chain and gear set
$2,701 to $3,541
GM labor time, 2009 to 2012
9.5 front-drive, 9.7 all-wheel
Special coverage 11340C
Expired; certain 2009 models only
Recall naming the chain
None found

The published figures, and which Traverse they describe

Start with RepairPal. For a 2019 Traverse it shows $2,701 to $3,541 for the chain and gear set. A tensioner repair on the 2018 is $2,541 to $3,464. The 2023 tensioner estimate, refreshed in September 2026, is $2,970 to $4,100, with labor at $2,342 to $3,437 and parts at $628 to $663.

EstimateModel yearRange
Chain with gear set2019$2,701 to $3,541
Chain tensioner2018$2,541 to $3,464
Chain tensioner2023$2,970 to $4,100

Every row above covers the redesigned SUV that began with 2018. The older SUVs, where the chain trouble is concentrated, have no RepairPal figure we could read, so those buyers lean on GM's labor times and on what owners paid. OnlineCarReport does not repair cars, which means every dollar amount here belongs to the source named beside it.

Why the bill is mostly labor

GM's service bulletin 12-06-01-009E covers first-generation Traverses built for model years 2009 through 2012 and fitted with the LLT V6. The chain kit is paid at 9.5 hours when the SUV is front-drive, and at 9.7 when it has all-wheel drive. A thrust washer fix adds half an hour, and recalibrating the oil life monitor adds 0.4.

The hours are high because the timing cover sits behind the engine's front end. The older special coverage procedure has the technician lower the frame, drain coolant and recover the A/C charge before reaching the chain. A shop's posted hourly rate times those hours gives the labor floor, and the kit plus fluids come on top.

  • 9.5 hours: front-wheel drive, 2009 to 2012
  • All-wheel drive adds a couple of tenths, at 9.7
  • Consumables to expect: oil, coolant, sealant and refrigerant

What owners reported paying

From an NHTSA owner complaint

The owner of a 2010 Traverse wrote in December 2017 that a P0008 code appeared at about 90,000 miles and the whole chain system had to be replaced. The shop billed $2,870 because the engine had to be dropped. The owner added that a 2009 would have been fixed under warranty, while Chevrolet declined to help with a 2010.

The takeaway: the owner's number sits inside the published range, and the model year, not the symptoms, decided who paid.

From an NHTSA owner complaint

A 2011 Traverse owner filed in December 2017 after the chain needed replacing at 113,000 miles, with the repair quoted at about $4,500. The owner argued that GM knew of the flaw from earlier model years and should reimburse owners of the 2011 as well.

The takeaway: quotes as high as $4,500 are on record for this engine, so a single estimate is a reason to get a second one, not a verdict.

What GM said wears the chain out

GM's special coverage bulletin ties premature chain wear to driving conditions combined with the original oil change intervals. The customer letter adds that oil age can play a part. An earlier reprogramming program for the engine computer was not enough for every vehicle, and the later chain repair bulletin bundled an oil life monitor update with the kit.

A new chain on an engine that is still run on long oil intervals faces the same cause. When a seller shows a recent chain invoice, ask whether the oil life calibration was done at the same visit, and ask for the oil change history since.

Check the bulletin codes

GM's bulletin applies when the engine stores one of P0008, P0009, P0016, P0017, P0018 or P0019. A scan printout showing those codes is your evidence that the chain, not another part, is the fault.

Mechanic photo above four labelled facts about Chevy Traverse timing chain coverage and labor

No recall, and the special coverage has run out

Special Coverage Adjustment 11340C, issued in November 2012, covered the chain on certain 2009 Traverses, lasting until a SUV reached ten years or 120,000 miles, whichever came first, measured from its first day in service. Every 2009 SUV is past that date now. Federal recall records for the 2009 through 2022 model years name no campaign for the chain, so nothing is free at a dealer.

The one useful side of the expired program is history: a 2009 Traverse may already have received a dealer-installed chain at no charge. That makes a service record or a dealer warranty-history lookup worth requesting before you price one.

How the repair changes what the SUV is worth

A value estimate starts from the VIN: year, trim, engine and mileage. The estimate does not know whether the chain has been done. If a Traverse is priced like a healthy one and has never had the job, a buyer should subtract the quote. If it carries an invoice, the car is worth more than an otherwise identical one without it.

  • No invoice, high mileage: treat the chain as a bill you will pay and take it off your offer
  • Invoice with date and mileage: the risk has been reduced, so a firmer price is fair
  • Repeat failure on record: price in the possibility of a second job

Odometer and title history matter here too. A rolled-back mileage hides how many miles the original chain has covered, and a salvage brand lowers the value regardless of what happens under the timing cover. A VIN history report with its free preview shows the mileage readings and title brands, so the repair bill is weighed against the true car.

When the chain job is not the last bill

From an NHTSA owner complaint

A 2011 Traverse owner wrote in April 2020 that a chain replacement just past 100,000 miles cost $3,500. Three weeks later the engine seized. The owner could not afford another engine and described the SUV as parked.

The takeaway: a completed chain job does not prove the engine is sound. Ask for the shop's findings, and for any metal or oil-pressure concerns noted at the visit. If the engine seized before, the price should say so.

Before you approve a quote or make an offer

  1. Run the VIN first to learn the engine: LLT through 2017, LFY for most of the newer ones.
  2. Hold a scan printout of the stored codes.
  3. Divide the quote by the shop's rate and compare the result with GM's 9.5 or 9.7 hours.
  4. Ask whether idler sprockets, actuators and guides are included; the bulletin says they usually should not be replaced.
  5. Request proof the oil life monitor calibration is current.

For a buyer, add a cold start with the engine off overnight. A rattle in the first seconds is cheap to hear and expensive to ignore.

Engine bay photo beside four numbered steps for checking a Traverse timing chain quote

Where this information comes from

Sources and photos: Facts checked against the sources above in November 2026. Photos by Dimitri Karastelev, Victor Hughes and Mustafa Sheikhmouss on Unsplash; diagrams by OnlineCarReport.

Keep reading

Frequently asked questions

What should a Traverse chain replacement cost?

For a 2019 Traverse, RepairPal shows a $2,701 to $3,541 band. Owners of 2010 and 2011 models told NHTSA they were billed $2,870 to $4,500. GM's 9.5 hours of labor for a front-wheel-drive 2009 to 2012 SUV explains most of the total, so compare any quote with the shop's hourly rate.

Which Traverse years should worry me about the chain?

GM's bulletin lists Traverses from 2009 to 2012 carrying the LLT V6, and its special coverage singled out certain 2009 builds. The same engine stayed through 2017, and the 2018 redesign moved to a different V6. Owner complaints cluster in the bulletin years, though NHTSA's engine category covers more than the chain.

Is there a recall or free repair for the Traverse timing chain?

No. Recall records for the 2009 through 2022 model years name no campaign for the chain. Special coverage 11340C once paid for certain 2009 models, but it was limited to 10 years or 120,000 miles and has expired. Dealers charge for the repair unless the vehicle still has factory powertrain coverage.

How do I know the Traverse chain is stretched?

GM describes a Service Engine Soon light with stored codes such as P0008, P0009, P0016, P0017, P0018 or P0019. One owner found a stored code with no dashboard light, and another heard a start-up rattle. A scan tool reading is the dependable first step, because it matches the bulletin's own entry conditions.

Does a timing chain repair affect the value of a used Traverse?

Yes. A value estimate built from the VIN and mileage will not know whether the chain was done. A dated invoice supports a higher asking price, while no record means a buyer should subtract the quote. Mileage and title records should be checked first, because they change the baseline.

Now check the car itself

The guide explains what to look for. The report shows what this VIN has on record.

Find the VIN on the driver's door jamb, at the base of the windshield, or on the registration and insurance card.